Visible Splice Joint

May 17, 2018

After splicing two optical fibers together the operator should make a visual inspection of the splice to ensure that there are no bubbles or other splice defects. One anomaly that may be seen when using a PAS core alignment fusion splicer is a visible splice joint.

Previous Flipbook
Splicing Bend Insensitive Fiber
Splicing Bend Insensitive Fiber

To enable low splice loss and accurate loss estimation, Fujikura optimized splice modes for ClearCurve to S...

Next Flipbook
Telecom Cleaning & Inspection Best Practices
Telecom Cleaning & Inspection Best Practices

A one micron diameter speck of dust obscures 1% of a 10 micron fiber endface, resulting in about 0.06 dB of...