To enable low splice loss and accurate loss estimation Fujikura optimized splice modes for ClearCurve to SMF and ClearCurve to ClearCurve in the FSM-60S. These splice modes perform X/Y alignment of the fiber cladding and loss estimation on alignment of the cores.
Splicing 900 µm Loose Buffer Fiber
Eliminate frustrations and increase productivity by understanding the unique characteristics of this fiber ...
Other content in this Stream
AFL Rethinks Fiber Demarcation with the OptiNID® Duo
AFL product manager, Will Miller, provides insights on choosing the proper fiber demarcation enclosure for your build and how the new OptiNID Duo could work for your installation.
DAS Supermarket Case Study
Design and installed a Distributed Antenna System (DAS) that improves signal strength, network capacity and coverage area within and outside the building.
Sean talks with CI&M at BICSI about key trends for 2019
Sean outlines key opportunities and challenges with CI&M at BICSI 2019. http://bit.ly/2URNfJ7
OSP FTTX Solutions
AFL provides the expertise to help maximize the deployment and reliability of any FTTx network both now and in the future.
As a world leader in fiber optic cabling, connectivity, testing and splicing, AFL has the expertise to provide complete end-to-end solutions for MDU FTTx applications.
OSP Microtechnology Reference Guide
Microtechonology Reference Guide for AFL OSP MicroCore® and DURA-LINE MicroDucts
Optical Networking for Cable Operators
AFL's Kevin Clayton is a featured speaker on Lightwave's webcast, Optical Networking for Cable Operators, from November 29, 2018.
Looking forward, the appetite for huge amounts of data keeps building and by 2020, experts predict a six-fold increase in data traffic worldwide.
ADSS Advantages Over Strand and Lash Fiber Cables in Aerial Electric Utility Applications
This paper will further explore some of the advantages of using ADSS cable as opposed to a strand and lash fiber cable for aerial electric utility applications.
DWDM Expansion over CWDM
DWDM allows you to add additional capacity without replacing your existing CWDM infrastructure and with minimal—if any—service interruption.
FTTx: Everything You Need to Know
As an end-to-end solutions provider, AFL prides itself on always being there for its customers. If you have any questions about the FTTx market, you’re in the right place.
New Ultra-Density Fiber Cable Technology for FTTx and Access Markets Using New SpiderWeb Ribbon®
The new ultra-density fiber optic cable technology, called Wrapping Tube Cable (WTC), utilizes a new optical fiber ribbon arrangement technology called SpiderWeb Ribbon (SWR®).
Kevin is talking MDU fiber connectivity at FiberConnect 2018
Kevin is talking MDU fiber connectivity at FiberConnect 2018. Come by booth #1507 and learn more.
Will is at FiberConnect 2018 talking Outside Plant Connectivity
Will is at FiberConnect 2018 talking Outside Plant Connectivity, come by booth #1507 and learn more.
AFL to Feature MicroCore® Cable, Compact Enclosures and FOCIS Duel at Fiber Connect
AFL will be showcasing a new compact splicing and distribution enclosure, 200 µm buffered OSP MicroCore cable and the new FOCIS Duel Fiber Inspection Tool in booth #1507.
Splicing 900 µm Loose Buffer Fiber
Eliminate frustrations and increase productivity by understanding the unique characteristics of this fiber type and its interaction with standard splicing equipment.
Visible Splice Joint
After splicing two optical fibers together the operator should make a visual inspection of the splice to ensure that there are no bubbles or other splice defects.
Telecom Cleaning & Inspection Best Practices
A one micron diameter speck of dust obscures 1% of a 10 micron fiber endface, resulting in about 0.06 dB of additional optical return loss.
Using a 70S to Align Fibers for Reel Testing
The procedure for setting up a splice mode in the Fujikura 70S so that the fusion splicer can be used to align the test jumper to the fiber under test
Connector Selection Guide