FUSEConnect® MPO Product FAQ (Updated 2024)
View Application Note
Application Notes
This Stream includes all of our Application Notes Flipbooks
-
-
Required Attachment Hardware for Titan RTD® Multiport Terminals and Trident® Hardened Drops
This application note lists the recommended mounting hardware for hanging the flat cable Titan RTD and flat Trident HFOC drops.
View Application Note
-
90R Splicer Error Code and Troubleshooting Quick Guide
This Application Note is meant to be support technicians who use a 90R splicer, who are new to splicing, or those who are migrating to the 90R from an older/different splicing platform.
View Application Note
-
90S+ Splicer Error Code and Troubleshooting Quick Guide
This application note outlines the common error codes that may appear when using the 90S+ Splicer and how to troubleshoot the errors.
View Application Note
-
Application Note: Data Center Cross-Connect H-Series
This application note shows how the H-Series Modular Connectivity Solution and SpiderWeb Ribbon® (SWR®) Cable can be utilized for a cross-connect in a colocation data center environment.
View Application Note
-
Introduction to Creating Your Own Splice Recipes
Follow this Application Note for the basics of creating a fusion splice recipe with the FSM-100 series fusion splicing machines.
View Application Note
-
[Application Note] FUSEConnect® LC Proper Housing Assembly Slider Modification
This Application Note covers the proper assembly method for the current housing with slider modification for the newly modified FUSEConnect® LC slider.
View Application Note
-
Application Note: TITAN RTD® Multiport Terminal and TRIDENT® Hardened Drop Cable Stubs Routing
This Application Note will cover the recommended routing for the TITAN RTD® Multiport Terminal and TRIDENT® Hardened Drop Cable Stubs.
View Application Note
-
Application Note: Active Fusion Control and Other Automatic Low-Loss Enabling Features of the 90S+ Fusion Splicer
In this Application Note, discover the new Active Fusion Control in the new Fujikura 90S+ fusion splicer technology, how it works and what improvements in splice loss you can expect.
View Application Note
-
Application Note: ASCEND® Cable Mounting Bracket
This Application Note reviews ASCEND® cable mounting brackets, an accessory to the ASCEND product line, and the maximum cable diameters that can fit within these brackets.
View Application Note
-
Application Note: FUSEConnect® MPO Heater Attachment
This Application Note covers the set up and best practices for the heater attachment included with each FUSEConnect® MPO with heat shrink pack.
View Application Note
-
FUSEConnect® MPO Product FAQ
FAQ document containing the answers to the most common questions relating to the FUSEConnect® MPO.
View Application Note
-
ASCEND® Connectivity Solutions - Polarity Method F
This Application Note will specifically address the default polarity of the ASCEND high density platform, as well as basic architecture of systems with both SFP and QSFP transceivers.
View Application Note
-
Access Recommendations for Umbilical Optical Fiber Cable
This application note describes recommendations for gaining access to the optical fibers in AFL’s Fiber Optic Component for Umbilical Cable with stranded wire armor and stainless steel tubes.
View Application Note
-
Considerations for Submerged Optical Cable Applications
This application note evaluates the pertinent underwater application requirements, operational risk factors and practical service life of cables that are directly influenced by a number of elements.
View Application Note
-
Splicing 900 µm Loose Buffer Fiber
Eliminate frustrations and increase productivity by understanding the unique characteristics of this fiber type and its interaction with standard splicing equipment.
View Application Note
-
Splicing Bend Insensitive Fiber
To enable low splice loss and accurate loss estimation, Fujikura optimized splice modes for ClearCurve to SMF and ClearCurve to ClearCurve in the FSM-60S.
View Application Note
-
Visible Splice Joint
After splicing two optical fibers together the operator should make a visual inspection of the splice to ensure that there are no bubbles or other splice defects.
View Application Note
-
Mechanics of Metallic Cable Structures for Downhole Optical Fiber Applications
This application note provides an overview of the importance of material selection for oil and gas applications involving high temperatures in conjunction with various mechanical loadings.
View Application Note
-
Using a 70S to Align Fibers for Reel Testing
The procedure for setting up a splice mode in the Fujikura 70S so that the fusion splicer can be used to align the test jumper to the fiber under test
View Application Note
-
Loading More...
![[Application Note] FUSEConnect® LC Proper Housing Assembly Slider Modification](https://content.cdntwrk.com/files/aT0xNDUzNzY3JnA9MCZ2ZXJzaW9uPTEmY21kPXYmc2lnPTYxNDg3NWIwNjZjNmI4MzkyYzk0YTVjMmI2NmIyNDQ2/-w-320.jpg)
