Using a 70S to Align Fibers for Reel Testing

May 17, 2018

This document outlines the procedure for setting up a splice mode in the Fujikura 70S so that the fusion splicer can be used to align the test jumper to the fiber under test.

Previous Flipbook
Telecom Cleaning & Inspection Best Practices
Telecom Cleaning & Inspection Best Practices

A one micron diameter speck of dust obscures 1% of a 10 micron fiber endface, resulting in about 0.06 dB of...

Next Flipbook
Connector Selection Guide
Connector Selection Guide

Choose the connector with features important to you. As the only company capable of providing every termina...