To enable low splice loss and accurate loss estimation Fujikura optimized splice modes for ClearCurve to SMF and ClearCurve to ClearCurve in the FSM-60S. These splice modes perform X/Y alignment of the fiber cladding and loss estimation on alignment of the cores.
Eliminate frustrations and increase productivity by understanding the unique characteristics of this fiber ...
Other content in this Stream
As a world leader in fiber optic cabling, connectivity, testing and splicing, AFL has the expertise to provide complete end-to-end solutions for MDU FTTx applications.
Provide high quality connections for all devices with AFL’s Distributed Antenna System (DAS), which is a scalable, affordable technology solution for boosting coverage indoors or outdoors.
With AFL's end-to-end solutions and our network expertise, we can guide you to the right products, coverage-area and deployment configuration for your wireless networks.
AFL supports service providers with a specifically trained staff that operates as an extension to provide implementation and support services and customer integration solutions to our customers.
AFL will be showcasing a new compact splicing and distribution enclosure, 200 µm buffered OSP MicroCore cable and the new FOCIS Duel Fiber Inspection Tool in booth #1507.
Eliminate frustrations and increase productivity by understanding the unique characteristics of this fiber type and its interaction with standard splicing equipment.
After splicing two optical fibers together the operator should make a visual inspection of the splice to ensure that there are no bubbles or other splice defects.
A one micron diameter speck of dust obscures 1% of a 10 micron fiber endface, resulting in about 0.06 dB of additional optical return loss.
The procedure for setting up a splice mode in the Fujikura 70S so that the fusion splicer can be used to align the test jumper to the fiber under test
Choose the connector with features important to you. As the only company capable of providing every termination option, AFL let’s you be the termination expert.
The new ultra-density fiber optic cable technology, called Wrapping Tube Cable (WTC), utilizes a new optical fiber ribbon arrangement technology called SpiderWeb Ribbon (SWR®).
The AFL IDEAA Exterior Distribution and Cross-Connect cabinets can be mounted onto a variety of different surfaces. This note focuses on split-lid hand-holes configured for the IDEAA cabinet.
AFL provided structured cabling installation management and performed all terminations to achieve a certified copper and fiber network with a 25-year warranty.
AFL provided an end-to-end turnkey GPON network solution to support this expansive continuous care retirement facility in the Greater Boston area.
AFL provided a single-mode fiber optic backbone network infrastructure to connect several campus buildings at Winston-Salem State University (WSSU).
Field-installable connectors provide a convenient method for terminating fiber optic cable at remote job site locations.
A weather-tight splice closure is the most beneficial fiber installation and it creates the optimum environment for safely and effectively housing fiber optic splices in aerial applications.
The micro-duct cable is designed to protect the fibers during installation and operation, withstanding over 300 pounds and extreme temperatures.
AFL has developed the next-generation of high-performance 600-lb rated micro-loose tube cable for the communications cabling infrastructure market.
This study identifies a number of key elements where new cable technology notably impacts fiber optic network installation and maintenance costs.