Using a 70S to Align Fibers for Reel Testing

This document outlines the procedure for setting up a splice mode in the Fujikura 70S so that the fusion splicer can be used to align the test jumper to the fiber under test.

Previous Flipbook
Telecom Cleaning & Inspection Best Practices
Telecom Cleaning & Inspection Best Practices

A one micron diameter speck of dust obscures 1% of a 10 micron fiber endface, resulting in about 0.06 dB of...

Next Flipbook
AFL Service Solutions - Wi-Fi
AFL Service Solutions - Wi-Fi

With AFL's end-to-end solutions and our network expertise, we can guide you to the right products, coverage...