Skip to main content

AFL

- All
- Converged Access Network
- FTTx
- MDUs
- HetNet

Recent Searches

Share this Post

Share on facebook
Share on twitter
Share on linkedin
Share on email

Home
Product > Specialty Fusion Splicing
CT-104, CT-105 and CT-106 Automated Fiber Cleavers

CT-104, CT-105 and CT-106 Automated Fiber Cleavers

Published Date December 13, 2016

Fujikura Automated Fiber Cleavers including the CT-104, CT-105 and CT-106. Visit our website to learn more: http://bit.ly/Cleavers

Previous Flipbook

Fourier Analysis Method for Asymmetric Polarization-Maintaining Fiber Alignment

The new method for alignment of asymmetric polarization-maintaining (PM) fibers improves alignment accuracy for PM fibers with asymmetric stress applying parts.
Next Video

Fiber Optic Glass Processing for Photonic Component Fabrication

This video outlines a number of photonic components and assemblies that can be fabricated including lenses, multi-core fan-outs, tapered devices and over-cladding.

Other content in this Stream

about 1 year ago
Introducing the Fujikura FSR-115, FSR-116, and FSR-117 optical fiber recoaters

Fujikura introduces newly enhanced FSR-115, FSR-116, and FSR-117 optical fiber recoaters. The recoaters’ new pumping system is up to 2.4 times more efficient during the injection step

Watch Video
about 1 year ago
New Recoaters Featured at Photonics West 2023

Photonics West 2023

Watch Video
almost 2 years ago
Fiber Processing Software (FPS) Quick Reference Guide

Follow this Fiber Processing Software (FPS) quick reference guide for the FSM-100 and LZM-100 series splicers.

Read Flipbook
almost 2 years ago
Introduction to Creating Your Own Splice Recipes

Follow this Application Note for the basics of creating a fusion splice recipe with the FSM-100 series fusion splicing machines.

Read Flipbook
about 2 years ago
Core Alignment for Large Mode Area Fibers

This white paper explains the different algorithms for LMA fiber core alignment and the different verification methods of core offset at the splice point for different LMA fibers.

Read Flipbook
about 3 years ago
LAZERMaster® LZM-125 Series

The LZM-125 series consists of splicing glass processing systems and fiber ablation machines that use a CO2 laser heat source to perform splicing, tapering, lensing, ablation and more.

Read Flipbook
about 3 years ago
Specialty Fiber Fusion Splicer FSM-100P/P+

The Fujikura FSM-100P/P+ specialty fiber fusion splicer now includes a new observation method for fiber rotational alignment.

Read Flipbook
over 5 years ago
New Approach for High Reliability, Low Loss Splicing between Silica and ZBLAN Fibers

This paper presents results obtained by using the high thermal expansion coefficient of the ZBLAN fiber to encapsulate a smaller SiO2 fiber.

Read Flipbook
over 5 years ago
High Efficiency Pump Combiner

In this paper we present an all fiber end pumped 7x1 pump combiner fabricated by CO2 laser splicing system.

Read Flipbook
over 5 years ago
Fiber Cladding Mode Stripper

Presented and characterized are an optimized cladding mode stripper design that increases the cladding light loss with a minimal device length and manufacturing time.

Read Flipbook
over 5 years ago
Ball Shaped End Caps

In this paper, general ball shaped end-caps are studied and illustrated. Different ball shaped end-caps were tested and measured for a variety of applications.

Read Flipbook
over 5 years ago
Annular Heating of Optical Fiber with a CO2 Laser Using Reflective Axicon Elements

By offsetting the light structure, precise localized zone heating and annealing of specific areas at a fiber’s surface can be achieved as well.

Read Flipbook
almost 6 years ago
Fourier Analysis Method for Asymmetric Polarization-Maintaining Fiber Alignment

The new method for alignment of asymmetric polarization-maintaining (PM) fibers improves alignment accuracy for PM fibers with asymmetric stress applying parts.

Read Flipbook
over 9 years ago
Fiber Optic Glass Processing for Photonic Component Fabrication

This video outlines a number of photonic components and assemblies that can be fabricated including lenses, multi-core fan-outs, tapered devices and over-cladding.

Watch Video
over 9 years ago
Fujikura APM101/102 Automatic Fiber Optic Preparation Machines

The APM-101 and APM-102 perform fiber optic stripping, cleaning, and cleaving operations in a single ~18 second process. Learn more on our website: http://bit.ly/APM101

Watch Video
almost 6 years ago
Stripping Optical Fibers Utilizing the Fujikura Polyimide Coating Stripper (PCS-100)

The recently released Fujikura PCS-100 is a novel stripping tool for removing polyimide coating from optical fibers.

Read Flipbook
almost 6 years ago
Interrelation Profile Analysis Method for Alignment of Polarization-Maintaining Fiber

A new method for alignment of polarization-maintaining (PM) fibers has been developed that solves alignment problems with low-contrast PM fibers.

Read Flipbook
almost 6 years ago
Heating Power Feedback Control for CO2 Laser Fusion Splicers

A novel feedback control method has been developed for an automated splicer using a CO2 laser as the heating element.

Read Flipbook
almost 6 years ago
Arc Power Calibration for Fusion Splicing Optical Fibers with Variety Diameters

A novel arc calibration method has been developed for fusion splicing optical fibers with a large variety of glass diameters.

Read Flipbook
almost 6 years ago
Automated Alignment and Splicing for Multi-Core Fibers

A novel method for aligning multi-core fibers (MCF) provides a systematic approach for MCF splicing in the lab, in cable factories, and in the field.

Read Flipbook

Recommended for You

Return to Home

© AFL