This video provides termination instructions for AFL FuseConnect MPO Connectors on Ribbon or Spiderweb Ribbon. These step by step instructions demonstrate the termination of a FuseConnect MPO connector with a heat sleeve on ribbon using a Fujikura 90R fusion splicer. Learn more on our website: https://bit.ly/3secXHY
2:23Cassette installation for the ASCEND High Density Platform fiber housing.
This application note discusses the pre-installed cable mounting clips included on the ASCEND trunk cable assemblies, the capacity of these clips within the various housings and recommended routing.
AFL's Patrick Dobbins, the Director of Solutions Engineering, provides information on extreme high density cables including its biggest users, its technology, recommendations on installation and more.
This Application Note reviews ASCEND® cable mounting brackets, an accessory to the ASCEND product line, and the maximum cable diameters that can fit within these brackets.
AFL created this Enterprise Selection Guide to improve customer experience while helping them build an end-to-end solution.
This guide walks through some typical FTTx network solutions,by which AFL offers unmatched end-to-end solutions to meet the demands of a fiber-to-the-x project.
3:44The ASCEND platform is a modular, high-density rack-mount solution designed for data center applications.
5:18The Apex closure line is designed to improve usability, decrease installation time, increase network reliability, and increase density of fiber splices, especially when coupled with AFL’s cables.
This Application Note covers the set up and best practices for the heater attachment included with each FUSEConnect® MPO with heat shrink pack.
FAQ document containing the answers to the most common questions relating to the FUSEConnect® MPO.
5:29Video instructions showing the termination of an AFL FuseConnect MPO connector with a heat sleeve on 3mm cordage using a Fujikura 90R fusion splicer.
0:56ASCEND Tap Cassette enables the efficient monitoring of network access points via patch cords right at the front of a rack mount system.
The Apex splice closure is designed to lower overall installation time with easier to use sealing and cable retention methods, along with industry-leading density.
The website features a host of improvements and new network solutions that make it easier for customers to find what they need.
In this follow-up blog, Dave Tanis explores the high-density fiber “ecosystem” that connects high fiber count cables into an optimized system delivering services.
In this blog, AFL's Dave Tanis discusses the factors that contribute to higher fiber count cables and how AFL's Wrapping Tube Cable with SpiderWeb Ribbon® meets that challenge.
The latest single and ribbon fiber holder selection guide for the current lineup of fusion splicers from AFL.
3:06in this video, AFL's Seán Adam, VP Market Strategy and Innovation chats with Janice Olivia, President, ISE Magazine about symmetrical gigabit broadband access.
6:28In this video interview, AFL's Seán Adam, VP Market Strategy and Innovation chats with Janice Olivia, President, ISE magazine about #5G and how it is transforming our daily lives.
