A detailed demonstration on how to perform basic optical loss testing using a power meter and a light source. This test is done to determine the amount of loss on the fiber under test (FUT) by shining a light from a source from one end of the fiber and measuring the loss on the other end with a power meter. Learn more about AFL’s light source and power meter test sets.
Short demonstration on how to inspect AFL’s TRIDENT and TITAN RTD connectors using the FOCIS Flex inspectio...
Most Recent Videos
AFL FlowScout PON Optical Power Meter is a fast, simple and accurate way to measure next gen and legacy PONs. Learn more on our website: https://bit.ly/FlowScout
Eric Basso Senior Engineer at BiOS
Dan Vaca RSM at BiOS
Bill Jacobsen Senior Engineer at BiOS
Fujikura 90S+ Fusion Splicer with Active Fusion Control Technology and Active Blade Management Technology.Learn more on our website: https://bit.ly/90Splus
AFL partnered with PCTEL and the Safer Buildings Coalition™ to conduct a series of field tests to evaluate the impact of the lines of communication for our first responders and the public.
AFL's director of applications engineering and field engineering provides an introduction to fiber optic technology in this presentation recording.
A fiber field technician with Spligitty talks about the benefits of using and installing the AFL Apex Fiber Optic Splice Closure.
AFL webinar that covers why network convergence is a critically important concept for all network operators and what a converged access network looks like.
Watch and learn about AFL's new 200 um OPGW (optical ground wire) fiber optic cable.
The Apex® closure line is designed to improve usability, decrease installation time, increase network reliability, and increase density of fiber splices, especially when coupled with AFL’s cables.
Webinar recording of AFL's Lucas Mays discussing how to be ready for the modern network builds with ribbon fiber.
Training video for the Fujikura RT-02 fiber ribbonizing tool.
AFL's AccessWrap solution is small and light weight allowing access to remote or hard to reach locations as well as removing the need for heavy installation equipment.
High Density Meets Faster Installation webinar presented by KGPCo and AFL addresses the accelerated 5G deployments demand for fiber-rich fronthaul and backhaul, featuring AFL's Apex® splice closure.
AFL Switchblade Fiber Containment Vault
Abdel talking Specialty Cable at OTC 2021. Stop by our booth #2253.
Take a video tour through our fibre optic cable manufacturing facility in Germany where we design and manufacture fibre optic cables based on stainless steel tube technology.
AFL Community Outreach in 60 Seconds - 2021
AFL’s Port Saver is a Field-Replaceable Connector that protects FlexScan®-series OTDR's ferrule from damage due to repeated mating.