Apex™ Instructional Video Series: Video 8: Apex Mounting and Accessories.

We live in a connected world and fiber plays a critical role. Every connection needs to be clean. Use the ICIC Method to eliminate the cause of 85% of Network Outages.

ASCEND Tap Cassette enables the efficient monitoring of network access points via patch cords tight at the front of a rack mount system.

The Apex closure line is designed to improve usability, decrease installation time, increase network reliability, and increase density of fiber splices, especially when coupled with AFL’s cables.

Will Miller, Senior Product Manager at AFL, introduces the Apex™ Family of Splice Closures.

Will Miller, Senior Product Manager at AFL, interviews David Wittmeier, Product Development Program Manager, about developing our Apex™ Fiber Optic Splice Closures.

Recording of live event from December 1, 2020, AFL launches Apex™, a new product solution that addresses fiber counts getting higher while space is getting smaller and harder to come by.

Instructional video series for the AFL Apex™ Fiber Optic Spice Closures. This is Video 1 of 8: Introduction to Apex.

Instructional video series for the AFL Apex Fiber Optic Spice Closures. This is Video 2 of 8: Installing SWR and similar type cable into Apex.

Instructional video series for the AFL Apex Fiber Optic Spice Closures. This is Video 3 of 8: Installing Flat Matrix Ribbon Cable into Apex.

Instructional video series for the AFL Apex Fiber Optic Spice Closures. This is Video 4 of 8: Installing Loose Tube Cable into Apex.

Instructional video series for the AFL Apex Fiber Optic Spice Closures. This is Video 5 of 8: Apex Basket Routing and Options.

Instructional video series for the AFL Apex Fiber Optic Spice Closures. This is Video 6 of 8: Apex Basket Routing and Options.

Instructional video series for the AFL Apex Fiber Optic Spice Closures. This is Video 7 of 8: Final Assembly and Troubleshooting.

Take a tour of AFL's FlexScan TS100 family of pocket-sized optical troubleshooters that provide service technicians with an easy-to-use PON fault locator, power meter, light source and more.

A demonstration on inspecting the Corning OptiTip system with just the press of a button using the FOCIS Lightning MPO inspection scope that analyzes the entire end-face in under 2 seconds.

Short demonstration on how to inspect AFL’s TRIDENT and TITAN RTD connectors using the FOCIS Flex inspection scope. It is mission critical to clean and inspect every connector.

AFL provides a detailed demonstration on how to perform basic optical loss testing using a power meter and a light source.

Watch this quick demonstration of how to clean optical connectors using a Cletop Optical Fiber Connector Cleaner and various fluids.

Take a virtual tour of our Accessories plant in Duncan, South Carolina

in this video, AFL's Seán Adam, VP Market Strategy and Innovation chats with Janice Olivia, President, ISE Magazine about symmetrical gigabit broadband access.