Fiber Optic Glass Processing for Photonic Component Fabrication
This video outlines a number of photonic components and assemblies that can be fabricated including lenses,...
Other content in this Stream
Fujikura 41S Splicer with Bluetooth Enabled CT50 Fiber Cleaver
With the 41S you can achieve splice analysis never before seen in an active cladding alignment splicer. And pairing the 41S with the superior cleaving efficiency of the Bluetooth enabled CT50 creates
Splicing 200µm Ribbon – Getting Started on the Right Foot
AFL Application Engineer Lucas Mays explains the challenges and options available when splicing 200µm fibers.
New Splicers Push Limits
AFL has released two new flusion splicers to the market. The Fujikura 41S Core Sensing fusion splicer, and the Fujukura 31S fusion splicer have both raised the bar of splicer technology.
AFL Launches Two Fujikura Fusion Splicers
The Fujikura 41S Core Sensing fusion splicer and the 31S both feature touchscreen technology and active cladding alignment capability, simplifying use and greatly reducing the need for rigorous...
AFL Releases Bluetooth®-enabled Fujikura Cleaver
AFL is launching the Fujikura CT50 fiber cleaver with innovative new features including Bluetooth capability, a push-button motorized blade rotation and a rugged exterior.
New Cleave Counter Feature in Fujikura 70 and 19 Series Fusion Splicers
One of the most critical maintenance tasks of fusion splicing equipment is cleaver maintenance. In addition to cleaning the clamp pads, blade rotation is the most common maintenance requirement.
Splicing 900 µm Loose Buffer Fiber
Eliminate frustrations and increase productivity by understanding the unique characteristics of this fiber type and its interaction with standard splicing equipment.
Splicing Bend Insensitive Fiber
To enable low splice loss and accurate loss estimation, Fujikura optimized splice modes for ClearCurve to SMF and ClearCurve to ClearCurve in the FSM-60S.
Visible Splice Joint
After splicing two optical fibers together the operator should make a visual inspection of the splice to ensure that there are no bubbles or other splice defects.
Using a 70S to Align Fibers for Reel Testing
The procedure for setting up a splice mode in the Fujikura 70S so that the fusion splicer can be used to align the test jumper to the fiber under test
Benefits of Aerial Splicing
A weather-tight splice closure is the most beneficial fiber installation and it creates the optimum environment for safely and effectively housing fiber optic splices in aerial applications.
Fujikura 70S+ Fusion Splicer from AFL
Fujikura 70S+ Fusion Splicer sets the new standard for splicers. Learn more: http://bit.ly/70S-Splicer
Splicing AFL's Wrapping Tube Cable (WTC) with SpiderWeb Ribbon® (SWR)
Instructions for splicing AFL's Wrapping Tube Cable with SpiderWeb Ribbon using a Fujikura 70R Fusion Splicer. Learn more on our website: http://bit.ly/wtc-swr
Fujikura Empalmadora De Fusión 70S Vídeo
Fujikura Empalmadora De Fusión 70S Vídeo: http://bit.ly/70S-Splicer
Fujikura Empalmadora De Fibra Individual 22S Vídeo
Fujikura Empalmadora De Fibra Individual 22S: http://bit.ly/1P6ysU0
Mike at PhotonicWest 2018
Mike at PhotonicWest 2018 at booth 2125 to talk about new specialty fibers.
Laser Focus World interviews Mike about the new LZM-110 laser splicer at PhotonicsWest 2017
Mike Hetrick, national sales manager OEM, interviewed by LaserFocus World about our new LZM-110 laser splicer at Photonics West 2017.
CT-104, CT-105 and CT-106 Automated Fiber Cleavers
Fujikura Automated Fiber Cleavers including the CT-104, CT-105 and CT-106. Visit our website to learn more: http://bit.ly/Cleavers
AFL's true end-to-end solutions for FTTX networks
AFL helps customers design, build, and effectively manage successful FTTX networks that integrate voice, data, and video applications to keep consumers connected.
Fujikura FSR-05, FSR-06, and FSR-07 Automatic Fiber Recoaters