Home » Product > Fusion Splicing » Using a 70S to Align Fibers for Reel Testing

× Share this Presentation

Facebook
Twitter
Email
LinkedIn

Using a 70S to Align Fibers for Reel Testing

May 17, 2018

Share this Flipbook
Facebook
Twitter
Email
LinkedIn

This document outlines the procedure for setting up a splice mode in the Fujikura 70S so that the fusion splicer can be used to align the test jumper to the fiber under test.

Previous Flipbook

Visible Splice Joint

After splicing two optical fibers together the operator should make a visual inspection of the splice to en...

Next Flipbook

Benefits of Aerial Splicing

A weather-tight splice closure is the most beneficial fiber installation and it creates the optimum environ...

Other content in this Stream

AFL Showcasing Bluetooth-enabled Fusion Splicer, Award-winning OTDR at TechAdvantage 2019

AFL, an industry-leading manufacturer of fiber optic cable, equipment, and accessories, is exhibiting at the 2019 Tech Advantage Conference and Expo in Orlando, FL.

Read Article

3:17

Fujikura 41S Splicer with Bluetooth Enabled CT50 Fiber Cleaver

With the 41S you can achieve splice analysis never before seen in an active cladding alignment splicer. And pairing the 41S with the superior cleaving efficiency of the Bluetooth enabled CT50 creates

Watch Video

Splicing 200µm Ribbon – Getting Started on the Right Foot

AFL Application Engineer Lucas Mays explains the challenges and options available when splicing 200µm fibers.

Read Article

New Splicers Push Limits

AFL has released two new flusion splicers to the market. The Fujikura 41S Core Sensing fusion splicer, and the Fujukura 31S fusion splicer have both raised the bar of splicer technology.

Read Article

AFL Launches Two Fujikura Fusion Splicers

The Fujikura 41S Core Sensing fusion splicer and the 31S both feature touchscreen technology and active cladding alignment capability, simplifying use and greatly reducing the need for rigorous...

Read Article

AFL Releases Bluetooth®-enabled Fujikura Cleaver

AFL is launching the Fujikura CT50 fiber cleaver with innovative new features including Bluetooth capability, a push-button motorized blade rotation and a rugged exterior.

Read Article

New Cleave Counter Feature in Fujikura 70 and 19 Series Fusion Splicers

One of the most critical maintenance tasks of fusion splicing equipment is cleaver maintenance. In addition to cleaning the clamp pads, blade rotation is the most common maintenance requirement.

Read Flipbook

Splicing 900 µm Loose Buffer Fiber

Eliminate frustrations and increase productivity by understanding the unique characteristics of this fiber type and its interaction with standard splicing equipment.

Read Flipbook

Splicing Bend Insensitive Fiber

To enable low splice loss and accurate loss estimation, Fujikura optimized splice modes for ClearCurve to SMF and ClearCurve to ClearCurve in the FSM-60S.

Read Flipbook

Visible Splice Joint

After splicing two optical fibers together the operator should make a visual inspection of the splice to ensure that there are no bubbles or other splice defects.

Read Flipbook

Benefits of Aerial Splicing

A weather-tight splice closure is the most beneficial fiber installation and it creates the optimum environment for safely and effectively housing fiber optic splices in aerial applications.

Read Flipbook