This document outlines the procedure for setting up a splice mode in the Fujikura 70S so that the fusion splicer can be used to align the test jumper to the fiber under test.
Other content in this Stream

Explore this brochure to see how AFL’s fiber and equipment solutions can help you build an expandable, flexible and accessible network in a range of application areas.

AFL webinar that covers why network convergence is a critically important concept for all network operators and what a converged access network looks like.

Josh Simer, AFL Market Manager for Service Providers and MSOs, outlines a likely-to-be common scenario for network operators when developing C-RAN and Edge data centers.

This guide walks through some typical FTTx network solutions,by which AFL offers unmatched end-to-end solutions to meet the demands of a fiber-to-the-x project.

The Apex closure line is designed to improve usability, decrease installation time, increase network reliability, and increase density of fiber splices, especially when coupled with AFL’s cables.

The Apex splice closure is designed to lower overall installation time with easier to use sealing and cable retention methods, along with industry-leading density.

In this follow-up blog, Dave Tanis explores the high-density fiber “ecosystem” that connects high fiber count cables into an optimized system delivering services.

In this blog, AFL's Dave Tanis discusses the factors that contribute to higher fiber count cables and how AFL's Wrapping Tube Cable with SpiderWeb Ribbon® meets that challenge.

in this video, AFL's Seán Adam, VP Market Strategy and Innovation chats with Janice Olivia, President, ISE Magazine about symmetrical gigabit broadband access.

In this video interview, AFL's Seán Adam, VP Market Strategy and Innovation chats with Janice Olivia, President, ISE magazine about #5G and how it is transforming our daily lives.

In this video, AFL's Seán Adam, VP Market Strategy and Innovation chats with Janice Olivia, President, ISE magazine about RDOF and how suppliers must adjust to the demand.

AFL's Sean Adam, VP Market Strategy and Innovation, chats with Janice Olivia, President, ISE Magazine about 5G, RDOF and symmetrical gigabit broadband access.

To understand why C-RAN and Edge Computing are happening, we need to look at the drivers of each, and when we do, we’ll see there isn’t necessarily an inevitable “collision.”

The Fujikura 90R Mass Fusion Splicer was recognized among the best in the industry with rating of 4 diamonds by the 2020 Broadband Technology Report's Diamond Technology Reviews.

The August 2020 issue of Lightwave magazine features AFL's Josh Simer on the need to plan for expandability, flexibility and accessibility in networks.

Join Tom and a special guest from a Tier 1 ISP to learn proper methods and best practices for cable routing within fiber management systems.

AFL solutions for building a service provider network with expandability, flexibility and accessibility to help combat black swan events, like COVID-19.

AFL helps customers design, build, and effectively manage successful FTTX networks that integrate voice, data, and video applications to keep consumers connected.

Seán Adam, AFL's VP of market strategy & innovation, kicks off a new 5G blog series that will focus on the emerging 5G ecosystem and infrastructure elements needed to transition to 5G.

Josh Simer, AFL's Service Provider Market Manager, continues the 5G discussion by reviewing the economic drivers of 5G.