Demand for power continues to increase at an alarming rate, forcing utilities to put greater and greater electrical loads on their existing lines. However, most existing transmission circuits have been designed for operation at or below 93˚C. Aluminum Conductor Steel Reinforced (ACSR), the most commonly used conductor, cannot handle the higher temperatures resulting from increased current loads. With the increasing de-regulation pressures, rising construction costs and right-of-way scarcity, another option is needed.
French translation of FlexScan OTDR demonstration. The AFL FlexScan OTDR, the world's smallest OTDR, offers...
Other content in this Stream
AccessWrap™ Installation Case Study for E.ON Distribution in Czech Republic.
AFL's AccessWrap solution is small and light weight allowing access to remote or hard to reach locations as well as removing the need for heavy installation equipment.
This guide walks through some typical FTTx network solutions,by which AFL offers unmatched end-to-end solutions to meet the demands of a fiber-to-the-x project.
Take a virtual tour of our Accessories plant in Duncan, South Carolina
In this video, AFL's Seán Adam, VP Market Strategy and Innovation chats with Janice Olivia, President, ISE magazine about RDOF and how suppliers must adjust to the demand.
AFL's Sean Adam, VP Market Strategy and Innovation, chats with Janice Olivia, President, ISE Magazine about 5G, RDOF and symmetrical gigabit broadband access.
A white paper discusses using Anti-rotational devices (ARD) in optical ground wire (OPGW) installations.
AFL's SkyWrap® provides an optical fibre bypass to allow replacement of damaged OPGW on high voltage transmission line for one of the largest electricity transmission companies in Europe.
A large electricity transmission company in the Middle East uses AFL SkyWrap® to upgrade their communications network using the overhead power transmission lines.
AFL's AccessWrap™ is installed at the fibre optic network of a large Central Asian oil generation company.
Keeping you in the know with our virtual trade show booths.
Video that shows AFL OPGW installation. This type of cable can be installed using typical conductor and shield wire stringing methods.
Adam Harrison, Application Engineer, talks about our all-dielectric self-supporting cable (ADSS). Discussed in the video are ADSS' advantages over other aerial fiber optic cables and the two ADSS desi
This white paper explores the options electric utilities have to bring fiber deeper into their networks and AFL's FOLLOW THE POWER® approach.
This paper will further explore some of the advantages of using ADSS cable as opposed to a strand and lash fiber cable for aerial electric utility applications.
Alternate cable stub options and how they could be used to lower overall FTTx deployment costs to provide rural Americans with access to reliable, high-bandwidth internet.
This Quick Reference Guide is intended to provide highlights of ADSS installation instructions needed in the field.
Video on AFL's optical ground wire (OPGW) applications and what type might be best for your project.
AFL provides this Quick Reference Guide to provide highlights of OPGW installation instructions needed in the field.
AFL's AccessWrap™ is catching up in popularity with SkyWrap® for aerial fiber optic cable in Europe.