AFL offers unmatched end-to-end solutions to meet the demands of a fiber-to-the-x (FTTx) project. For electric utilities, enterprise, and service providers, we provide a full solution of passive components. This guide walks through some typical FTTx network solutions from the headend to “x” – for whatever you are taking fiber to, highlighting some of the typical passive AFL products that can be used for your network.
Other content in this Stream

Cassette installation for the ASCEND High Density Platform fiber housing.

This application note discusses the pre-installed cable mounting clips included on the ASCEND trunk cable assemblies, the capacity of these clips within the various housings and recommended routing.

AFL's Patrick Dobbins, the Director of Solutions Engineering, provides information on extreme high density cables including its biggest users, its technology, recommendations on installation and more.

This Application Note reviews ASCEND® cable mounting brackets, an accessory to the ASCEND product line, and the maximum cable diameters that can fit within these brackets.

AFL created this Enterprise Selection Guide to improve customer experience while helping them build an end-to-end solution.

This Application Note covers the set up and best practices for the heater attachment included with each FUSEConnect® MPO with heat shrink pack.

FAQ document containing the answers to the most common questions relating to the FUSEConnect® MPO.

The ASCEND platform is a modular, high-density rack-mount solution designed for data center applications.

Video instructions showing the termination of an AFL FuseConnect MPO connector with a heat sleeve on 3mm cordage using a Fujikura 90R fusion splicer.

Video showing termination instructions for AFL FuseConnect MPO Connectors on Ribbon or Spiderweb Ribbon.

ASCEND Tap Cassette enables the efficient monitoring of network access points via patch cords right at the front of a rack mount system.

The Apex closure line is designed to improve usability, decrease installation time, increase network reliability, and increase density of fiber splices, especially when coupled with AFL’s cables.

The Apex splice closure is designed to lower overall installation time with easier to use sealing and cable retention methods, along with industry-leading density.

The website features a host of improvements and new network solutions that make it easier for customers to find what they need.

In this follow-up blog, Dave Tanis explores the high-density fiber “ecosystem” that connects high fiber count cables into an optimized system delivering services.

In this blog, AFL's Dave Tanis discusses the factors that contribute to higher fiber count cables and how AFL's Wrapping Tube Cable with SpiderWeb Ribbon® meets that challenge.

The latest single and ribbon fiber holder selection guide for the current lineup of fusion splicers from AFL.

AFL's Sean Adam, VP Market Strategy and Innovation, chats with Janice Olivia, President, ISE Magazine about 5G, RDOF and symmetrical gigabit broadband access.

The Fujikura 90R Mass Fusion Splicer was recognized among the best in the industry with rating of 4 diamonds by the 2020 Broadband Technology Report's Diamond Technology Reviews.