AFL LC Push-Pull Uniboot Polarity Reversible Connector Instructions
Instructions on using the AFL LC Push-Pull Uniboot Polarity Reversible Connector.
Instructions on using the AFL LC Push-Pull Uniboot Polarity Reversible Connector.
This Application Note covers the set up and best practices for the heater attachment included with each FUSEConnect® MPO with heat shrink pack.
FAQ document containing the answers to the most common questions relating to the FUSEConnect® MPO.
The ASCEND platform is a modular, high-density rack-mount solution designed for data center applications.
Video instructions showing the termination of an AFL FuseConnect MPO connector with a heat sleeve on 3mm cordage using a Fujikura 90R fusion splicer.
Video showing termination instructions for AFL FuseConnect MPO Connectors on Ribbon or Spiderweb Ribbon.
ASCEND Tap Cassette enables the efficient monitoring of network access points via patch cords right at the front of a rack mount system.
NodeFLEX cable assemblies from AFL utilize an innovative bendable boot allowing a single cable to be used for either a straight or 90 degree configuration. Learn more on our website: https://bit.ly/33
in this video, AFL's Seán Adam, VP Market Strategy and Innovation chats with Janice Olivia, President, ISE Magazine about symmetrical gigabit broadband access.
In this video interview, AFL's Seán Adam, VP Market Strategy and Innovation chats with Janice Olivia, President, ISE magazine about #5G and how it is transforming our daily lives.
In this video, AFL's Seán Adam, VP Market Strategy and Innovation chats with Janice Olivia, President, ISE magazine about RDOF and how suppliers must adjust to the demand.
NodeFLEX is a universal, flexible node cable assembly that features a bendable rubber boot with integrated steel rods which hold the cable in place up to 90° after flexing.
Terminating fiber cable doesn’t have to be tricky business. Keep it simple by choosing the connector with features important to you.
Seán Adam, AFL's vice president of market strategy and innovations, wrote the feature article of ICT Today's April/May/June 2020 issue, focusing on the need for a rich optical fiber infrastructure.
Seán Adam, VP Market Strategy & Innovation, interviewed by CI&M at BICSI 2020, talks our three areas of focus for 2020, ASCEND high density modular platform and Fujikura 90 series fusion splicers.
AFL's Kevin Clayton talks about the four pillars of the AFL ASCEND rackmount platform.
Product brochure for the ASCEND platform, a modular, high-density, rack-mount solution designed for data centers, central offices, headends and structured cabling networks.
This Application Note will specifically address the default polarity of the ASCEND high density platform, as well as basic architecture of systems with both SFP and QSFP transceivers.
AFL receives two patents for technology and developments in Optical Connectivity and Apparatus (OCA) products.
Designed to maximize module capacity through both front and rear access in four rack units, the XFM-28 panel is ideal where additional rack space is unavailable.
Doug walks you through the features of our ASCEND solution. Learn more at https://www.aflglobal.com/ASCEND