The AFL IDEAA Exterior Distribution and Cross-Connect cabinets can be mounted onto a variety of different surfaces. This application note focuses on split-lid hand-holes that are configured in such a way to accommodate the IDEAA cabinet.
Most Recent Flipbooks
Considerations for Submerged Optical Cable Applications
This application note evaluates the pertinent underwater application requirements, operational risk factors and practical service life of cables that are directly influenced by a number of elements.
How to pair Turbo Compact Base to a smart device with Android 6.0 and higher
This application note helps users to identify quickly and easily the lack of permissions from Android devices and correct them.
Best Practices of Data Security with Rogue Turbo OLTS
AFL extends the abilities of the Rogue® Turbo app to support multiple user accounts, pausing of real-time synchronization, and helping ensure data security on logout.
New Cleave Counter Feature in Fujikura 70 and 19 Series Fusion Splicers
One of the most critical maintenance tasks of fusion splicing equipment is cleaver maintenance. In addition to cleaning the clamp pads, blade rotation is the most common maintenance requirement.
Splicing 900 µm Loose Buffer Fiber
Eliminate frustrations and increase productivity by understanding the unique characteristics of this fiber type and its interaction with standard splicing equipment.
Splicing Bend Insensitive Fiber
To enable low splice loss and accurate loss estimation, Fujikura optimized splice modes for ClearCurve to SMF and ClearCurve to ClearCurve in the FSM-60S.
Visible Splice Joint
After splicing two optical fibers together the operator should make a visual inspection of the splice to ensure that there are no bubbles or other splice defects.
Mechanics of Metallic Cable Structures for Downhole Optical Fiber Applications
This application note provides an overview of the importance of material selection for oil and gas applications involving high temperatures in conjunction with various mechanical loadings.
Using a 70S to Align Fibers for Reel Testing
The procedure for setting up a splice mode in the Fujikura 70S so that the fusion splicer can be used to align the test jumper to the fiber under test
Benefits of Stainless Steel Tubes in Subsea Optical Cables
Inside of many subsea umbilical cables, optical fiber data communications is needed to monitor fluid flow rate, pressure and temperature at a subsea wellhead.
National Fire Protection Association (NFPA) Requirements for Optical Cables in Transit Applications
Fire prevention, especially in confined areas such as underground tunnels and subterranean platforms/stations, must be addressed to protect the general public form harm.
Rodent Deterrence in All-Dielectric Cables
Optical cables are exposed to a variety of mechanical and environmental hazards including gophers, squirrels, rats and mice.
Variations and Design Considerations of Traditional Downhole Fiber Optic Cable for Oil and Gas Applications